Advanced-Water-Ionizers.com
Advanced Cleansing & Nutrition
Advancing your health

$45.00
Order Now

We are pleased to offer for the first time in the United States the electrolysis cleaning cartridge for the Microwater ND-145 and ND-155 Water ionizer. Most customers have had their water systems for at least ten years, so we expect significant calcium build on the electrolysis plates of these machines. This electrolysis cleaning cartridge will help you get more life out of your water ionizer by cleaning the plates and internal hoses. Why is this important? 

Have you ever used a pot to boil water over and over without washing it? What occurs? A white film begins to build up. Well, this same water is running through your machine and the electrolysis plates your machine works by attracting the calcium and magnesium in your water to itself so it can be ionized. This process will inevitably lead to a build up of calcium on the electrolysis plates just like what you see in that pot. What does this do? This scale build up forms a barrier between the water and the electrolysis plate thereby reducing the effect of the ionization. As this scale accumulates on plates your machine will not be able to make the same quality alkaline water as when you just bought it. Even though every machine has an automatic cleaning cycle, over time it is not enough to control the calcium build up on the plates. If this calcium build up continues and your water ionizer is not effectively cleaned it will have trouble making alkaline water and even worse the calcium build up could get hardened over time.

The basic idea behind using the this cleaning cartridge is to have the acid media in the cartridge mix with some water and move from the cartridge to the electrolysis chamber of your ionizer. This can be achieved by installing the cleaning cartridge filter, then turn on the tap for a short period. Once water start flowing through the flexible metal discharge hose, turn off the tap. Allow the acid water to sock and dissolve any calcium build up on the electrolysis plates. Let sit for a few hours and then flush by running water for three to five minutes. Install your regular cartridge filter and enjoy alkaline water.  

How often or when should you use the cleaning cartridge?
Clean the unit at least once every year, especially:

1. If you find small white particles mixed in with the alkaline water (microwater or Kangen Water).

2. When the pH level fails to vary in accordance with the unit's setting, as measured by pH indicator liquid.

3. When the alkaline water comes out sparingly, stops, or when drops of white liquid after using the unit.

Microwater ND-145/ND-155 Cleaning Cartridge Instructions

 Clean the unit at least once every year, especially:  

• If you find small white particles mixed in with the alkaline water (microwater).
• When the pH level fails to vary in accordance with the unit's setting, as measured by pH indicator liquid.
• When the alkaline water comes out sparingly, stops, or when drops of white liquid after using the unit.
• If your source water is hard.

Caution: Be certain to shut off the faucet and turn off the unit before beginning cleaning. Be certain to unplug the unit before beginning. Failure to do so could result in serious damage. 

1. Remove the main unit's water filter cover, unscrew and remove the regular filter cartridge.

2. Insert the electrolysis cleaning cartridge just as you would install a regular cartridge filter.

3. Plug the end of the secondary acid run off hose with the hose stopper. This is the hose that hangs lose in the sink.

4. Disconnect one of the double hoses connected to the faucet. The hose to disconnect is the hose that returns alkaline water from the microwater ionizer.  

5. Turn on just enough water so that it drips from the end of the disconnected hose hose. After allowing it to run (drip) for a minute, then turn off the tap and let sit for 3 to 5 hours.  

6. Unplug the disconnect hose and the secondary acid water run off hose.  

7. Turn on the water and let it run for 5 to 10 minutes.  

8. Turn of the water and reconnect the disconnected hose to the faucet.  

9. Follow in the same as instructions 1 and 2 replace the cleaning cartridge with the regular filter cartridge. After the regular filter cartridge is installed run the water for 1 to 3 minutes. 

10. Replace the water filter cover, plug the water ionizers back in, and cleaning is finished. 

11. After cleaning, there is a chance that some calcium could appear in the water. In such a case, please discard that water.

Microwater ND Cleaning Cartridge
International Shipping Information
Microwater Cleaning Cartridge Cartridge	$45.00
FREE SHIPPING IN THE USA FOR ORDERS OVER $100.00

See All Our Alkaline Water Ionizers

Faucet Diverters & Hoses

Replacement Filters | Cleaning Cartridge | Pre-Filters & Housings

Get Informed:
Alkaline Water Benefits
Kangen Water Facts
Alkaline Health Books
Articles & Quotes From:
Dr. Hidemitsu Hayashi MD.
Sang Whang
Dr. Theodore A. Baroody
Dr. David S. Dyer
Alkaline Water Experts

Maintenance Tips
Uses for Alkaline Water
Uses for Acid Water

[top of page]